RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Steering Gear: Service and Repair
Overhaul
Housing End Plug
DISASSEMBLY
1. Unseat and remove retaining ring from groove with a punch through the hole in the end of the housing.
2. Slowly rotate stub shaft with 12 point socket COUNTER-CLOCKWISE to force the end plug out from housing.
CAUTION: Do not turn stub shaft any further than necessary. The rack piston balls will drop out of the rack piston circuit if the stub shaft is turned
too far.
3. Remove O-ring from the housing.
ASSEMBLY
