RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
17. Remove E-clip and washer that retains throttle lever shaft in manual lever (Fig. 52).
Fig. 53
18. Remove manual lever and throttle lever (Fig. 53). Rotate and lift manual lever off valve body and throttle lever shaft. Then slide throttle lever out
of valve body.
Fig. 54
19. Position pencil magnet next to detent housing to catch detent ball and spring. Then carefully remove Retainer Tool 6583 and remove detent ball
and spring (Fig. 54).