RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
Fig. 93
2. Install new O-rings on governor pressure solenoid and sensor (Fig. 93).
3. Lubricate solenoid and sensor O-rings with clean transmission fluid.
4. Install governor pressure sensor in governor body. Then secure sensor with M-shaped retaining clip.
Fig. 94
5. Install governor pressure solenoid in governor body (Fig. 94). Push solenoid in until it snaps into place in body.
Fig. 95
6. Position governor body gasket on transfer plate (Fig. 95).
