RAM 3500 Truck 2WD V10-8.0L VIN W MDC (1999)
EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Using the appropriate year Service Manual, Group 21 Transmissions, remove and disassemble the transmission to the point where the front
transmission housing has been removed.
2.
Remove the old shift shaft lever.
3.
Install the revised shift shaft lever p/n 05072248AA.
4.
Verity that the notches in the shift fork arms are aligned.
5.
Rotate the shift shaft lever and bushing downward (out of the fork arms), to expose the detent bore in the new shift shaft lever (Fig. 1).
6.
Lubricate the detent spring, detent plunger, and detent bore with transmission fluid, p/n 04874464.
7.
Install the detent spring, p/n 04741137, into the shift shaft lever detent bore.