RAM 3500 Truck 2WD V8-5.7L (2008)
Amplifier: Service and Repair
Removal
REMOVAL
INSTRUMENT PANEL MOUNTED
1. Disconnect and isolate the battery negative cable.
2. Remove glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Removal .
3. Remove instrument panel center bezel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Center Bezel - Removal .
4. Disconnect electrical harness connector (4) from amplifier (2)
5. Remove mounting bolts (3) and amplifier.
CENTER SEAT MOUNTED
1. Disconnect and isolate the battery negative cable.
2. Raise center seat cushion to access amplifier.
3. Remove mounting fasteners.
4. Disconnect electrical harness connector and remove amplifier.