RAM 3500 Truck 2WD V8-5.7L (2008)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Installation
INSTALLATION
UPPER HINGE
1. Install the hinge to door washers, if there were removed previously, nut (1) and bolt (9) and tighten to 28 Nm (21 ft. lbs.).
2. Tighten the upper hinge bolt (2) to 28 Nm (21 ft. lbs.).
3. Tighten the upper hinge bolt (1) to 28 Nm (21 ft. lbs.).
4. Tighten the upper hinge bolt (3) to 28 Nm (21 ft. lbs.).
5. Adjust the door if needed. See: Adjustments
LOWER HINGE