RAM 3500 Truck 2WD V8-5.7L (2008)
Power Door Lock Switch: Service and Repair
Power Lock Switch
Removal
REMOVAL
The power lock switch on the driver side front door trim panel is integral to the window/lock switch. See: Window/Door Lock Switch/Removal
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal
3. Remove the switch from the trim panel bezel.
Installation
INSTALLATION
1. Insert switch to trim panel bezel.
2. Install door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel - Installation
.
3. Connect battery negative cable.