RAM 3500 Truck 2WD V8-5.7L (2008)
3. Remove the caliper from the steering knuckle, See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Removal
and remove caliper adapter assembly.
4. Remove the extension to the rotor nuts HD DRW ONLY.
5. Remove the rotor from the hub/bearing wheel studs.
Rear Dual Wheels
REAR DUAL WHEELS
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper, See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Removal .
4. Remove the caliper adapter bolts.
5. Remove the rear axle shaft from the housing on dual rear wheels, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Axle Shaft/Service and Repair/Rear Axle - 11 1/2 AA/Removal .
6. Remove the hub and rotor assembly.
7. Disassemble the hub from the rotor if needed by removing the bolts (1).
Rear
REAR