RAM 3500 Truck 2WD V8-5.7L (2008)
CAUTION: 5.7L engines equipped with MDS uses a unique camshaft for use with the Multi Displacement System. When installing a new
camshaft, the replacement camshaft must be compatible with the Multi Displacement System.
1. Lubricate camshaft lobes and camshaft bearing journals and insert the camshaft.
2. Install camshaft Tensioner plate assembly. Tighten bolts to 28 Nm (250 in. lbs.).
3. Install timing chain and sprockets See: Timing Components/Timing Chain/Service and Repair/Timing Chain & Sprockets - Installation .
4. Measure camshaft end play See: Specifications/Engine Specifications . If not within limits install a new thrust plate.
