RAM 3500 Truck 2WD V8-5.7L (2008)
Crankshaft: Service and Repair
Crankshaft - Removal
REMOVAL
1. Remove the vibration damper (1) See: Harmonic Balancer - Crankshaft Pulley/Service and Repair/Vibration Damper - Removal .
2. Remove the rear oil seal retainer See: Crankshaft Seal Retainer/Service and Repair/Crankshaft Rear Oil Seal Retainer - Removal .
3. Remove the oil pan See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan - Removal .
4. Remove the oil pump pickup.
5. Remove the windage tray/oil pan gasket.
