RAM 3500 Truck 2WD V8-5.7L (2008)
5. Position the oil pan and install the mounting bolts and studs. Tighten the mounting bolts to 12 Nm (105 in.lbs.), using the sequence above.
6. Lower the transmission onto the crossmember. Install nuts, and tighten.
7. Lower the engine into mounts using Engine Support Fixture 8534.
8. For 2WD vehicles, Install both the left and right side engine mount through bolts. Tighten the nuts to 68 Nm (50 ft. lbs.).
9. For 4WD vehicles, Install both the left and right side engine mount bracket to mount bolts. Tighten the nuts to 68 Nm (50 ft. lbs.).
10. Remove Engine Support Fixture 8534.
11. Install the structural cover (1) See: Service and Repair/Removal and Replacement/Structural Dust Cover - Installation .
12. Install the front crossmember See: Body and Frame/Frame/Cross-Member/Front Cross-Member/Service and Repair .
13. Fill engine oil.
14. Reconnect the negative battery cable.
15. Start engine and check for leaks.
