RAM 3500 Truck 2WD V8-5.7L (2008)
Ignition Coil: Service and Repair
Ignition Coil Capacitor
Removal
REMOVAL
The coil capacitor is located in the right-rear section of the engine compartment. It is attached with a mounting stud and nut.
1. Disconnect electrical connector (5) at capacitor.
2. Remove mounting nut and remove ground strap.
3. Remove capacitor (1).
Installation
INSTALLATION
1. Position capacitor (1) to mounting stud (2).
2. Position ground strap (3) to mounting stud (2).
3. Tighten nut (4) to 7 Nm (60 in. lbs.) torque.
4. Connect electrical connector (5) to coil capacitor.