RAM 3500 Truck 2WD V8-5.7L (2008)
1. Install the TRS (2) to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw (1) and torque to 5 Nm (45 in. lbs.) torque.
3. Install the manual shaft seal (1).
4. Install valve body to the transmission. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/42RLE Automatic Transmission/Installation