RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
5. Remove the caliper mounting bolts.
6. Remove the disc brake caliper from the mount.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
7. Remove the inboard and outboard brake pads.
8. Remove the anti-rattle clips.
9. Remove the caliper adapter mounting bolts.
INSTALLATION - REAR
1. Install the caliper adapter mounting bolts. Tighten the mounting bolts to 135 Nm (100 ft. lbs.).
2. Install the anti-rattle clips.
3. Install the inboard and outboard pads.
4. Install the caliper mounting bolts.
5. Install the tire and wheel assembly