RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
Oil Pan: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Install engine support fixture special tool # 8534. Do not raise engine at this time.
3. For 2WD vehicles, Remove both engine mount to frame through bolts.
4. For 4WD vehicles, Loosen both left and right side engine mount bracket to mount bolts, and remove the lower bolt on each side. The upper hole
in the engine bracket is slotted.
5. Remove the structural dust cover (1).
6. Drain engine oil.
