RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
Fig. 4 Shaft Protector And Puller - Typical
10. Install the lip of the rotor puller (Special Tool C-6141-1 or equivalent) into the snap ring groove exposed in the previous step, and install the shaft
protector (Special Tool C-6141-2 or equivalent).
Fig. 5 Install Puller Plate - Typical
11. Install the puller through-bolts (Special Tool C-6461 or equivalent) through the puller flange and into the jaws of the rotor puller and tighten. Turn
the puller center bolt clockwise until the rotor is free.
CAUTION: DO NOT APPLY FORCE TO THE END OF THE COMPRESSOR SHAFT.