dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Cable > < Electrical Specifications|Page 1423
Page 1
background image

Ignition Timing: Description and Operation

IGNITION TIMING

Ignition timing is not adjustable on any engine.

The ground circuit for the coil within the ASD relay is controlled by the Powertrain Control Module (PCM). The PCM operates the ASD relay by
switching its ground circuit on and off.

The ASD relay will be shut-down, meaning the 12-volt power supply to the ASD relay will be de-activated by the PCM if:
-

the ignition key is left in the ON position. This is if the engine has not been running for approximately 1.8 seconds.

-

there is a crankshaft position sensor signal to the PCM that is lower than pre-determined values.

Ignition Cable > < Electrical Specifications|Page 1423