dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/Erroneous DTC's Set|Page 4153 > < Engine Controls - Erratic A/T Operation/MIL ON|Page 4148
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/Erroneous DTC's Set

NUMBER: 18-037-03

GROUP: Vehicle Performance

DATE: October 10, 2003

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. THE SOFTWARE WILL BE AVAILABLE ON TechCONNECT ON OR AFTER
OCTOBER 27, 2003.

SUBJECT:
Flash: MIL Illumination, Erroneous Diagnostic Trouble Codes (DTC's) P0116, P2172, P2173

OVERVIEW:

This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:
2003 (AN) Dakota
2003 (DN) Durango
2003 (DR) Ram Truck

NOTE:

This bulletin applies to vehicles as indicated in the table.

SYMPTOM/CONDITION:

The customer may experience a MIL illumination that when diagnosed may have been caused by one or more of the following erroneous DTC's:

^

P0116 - Engine Coolant Temperature Circuit Performance

^

P2172 - High Airflow/Vacuum Leak Detected (Instant Accum.)

^

P2173 - High Airflow/Vacuum Leak Detected (Slow Accum.)

DIAGNOSIS:

Using a Scan Tool (DRBIII(R)) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTC's are
present, other than those listed, record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the customer describes the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED

Engine Controls - MIL ON/Erroneous DTC's Set|Page 4153 > < Engine Controls - Erratic A/T Operation/MIL ON|Page 4148