RAM 3500 Truck 2WD V8-5.7L VIN D (2003)
8. Install and tighten the two screws that secure the mounting tabs of the two panel outlet housings to the upper glove box opening reinforcement.
Tighten the screws to 2 Nm (20 in. lbs.).
9. Reinstall the lower surround onto the instrument panel.
10. Do not reconnect the battery negative cable at this time. The supplemental restraint system verification test procedure should be performed
following service of any supplemental restraint system component (Refer to RESTRAINTS - STANDARD PROCEDURE - VERIFICATION
TEST).
