RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Engine-To-Body Ground Strap Remove/Install
Engine-To-Body Ground Strap Remove/Install
2. Remove the screw that secures the engine-to-body ground strap eyelet to the back of the engine cylinder head.
3. For the right side only on vehicles equipped with a this engine, remove the nut that secures the engine-to-body ground strap eyelet to the right
rear valve cover stud.
4. Remove the engine-to-body ground strap from the engine compartment.
Heater Core Ground Strap
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box from the instrument panel. Refer to Glove Box in the Removal and Installation for the procedures.
