RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Glove Box Opening Upper Trim Strip Remove/Install
3. Remove the three screws that secure the trim strip to the instrument panel glove box opening upper reinforcement.
4. Remove the trim strip from the instrument panel glove box opening upper reinforcement.
INSTALLATION
1. Position the trim strip onto the instrument panel glove box opening upper reinforcement.
2. Install and tighten the three screws that secure the trim strip to the instrument panel glove box opening upper reinforcement. Tighten the mounting
screws to 2.2 Nm (20 in. lbs.).
3. Close the glove box.
4. Reconnect the battery negative cable.
