RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Vacuum Reservoir Remove/Install
6. Disconnect vacuum supply line from vacuum reservoir.
7. Remove 2 vacuum reservoir mounting screws.
8. Remove vacuum reservoir from vehicle.
INSTALLATION
1. Install vacuum reservoir and two mounting screws. Tighten screws to 2.2 Nm (20 in. lbs.) torque.
2. Connect vacuum supply hose to vacuum reservoir.
3. Position cowl plenum cover/grille panel to vehicle.
4. Install and tighten cowl cover fasteners to vehicle body.
5. Install rubber weather-strip at front edge of cowl grill.
6. Install windshield wiper arms. Refer to Wiper and Washer Systems.
7. Connect negative battery to cable.
