RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Intake Air Temperature (IAT) Sensor: Service and Repair
Fig. 51 Air Temperature Sensor (Typical)
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
REMOVAL
1. Remove air cleaner assembly.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.
INSTALLATION
1. Install sensor to intake manifold. Tighten to 12 - 15 Nm (110 - 130 in. lbs.) torque.
2. Install electrical connector.
3. Install air cleaner.
