RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Controller Antilock Brake: Service and Repair
Four Wheel Antilock System
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB. For axle type refer
to Transmission and Drivetrain, Differential. For tire revolutions per mile refer to Steering and Suspension, Tires, Wheels and Alignment. To program
the CAB refer to Testing and Inspection, Procedures.
REMOVAL
1. Disconnect battery negative cable.
2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.
3. Disconnect the pump motor connector.