RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
Driver Side Airbag Trim Cover Retainers Remove/Install
5. Remove the upper and lower trim cover retainers from the driver side airbag housing studs.
6. Remove the horn switch ground wire eyelet terminal from the upper right stud on the back of the driver side airbag housing.
Driver Side Airbag Trim Cover Remove/Install
7. Disengage the six trim cover locking blocks from the lip around the outside edge of the driver side airbag housing and remove the housing from
the cover.
INSTALLATION
WARNING:
-
USE EXTREME CARE TO PREVENT ANY FOREIGN MATERIAL FROM ENTERING THE DRIVER SIDE AIRBAG MODULE,