RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
ASSEMBLY
1. Lubricate O-ring with power steering fluid and install into the housing.
2. Install end plug by tapping the plug lightly with a plastic mallet into the housing.
3. Install retaining ring so one end of the ring covers the housing access hole.
Pitman Shaft/Seals/Bearings
DISASSEMBLY
1. Clean exposed end of pitman shaft and housing with a wire brush.
2. Remove preload adjuster nut.
3. Rotate the stub shaft with a 12 point socket from stop to stop and count the number of turns.
4. Center the stub shaft by rotating it from the stop 1/2 of the total amount of turns.
