RAM 3500 Truck 2WD V8-5.9L VIN 5 HDC (2000)
COOLER FLUSH USING TOOL 6906A
1. Remove cover plate filler plug on Tool 6906A. Fill reservoir 1/2 to 3/4 full of fresh flushing solution. Flushing solvents are petroleum based
solutions generally used to clean automatic transmission components. DO NOT use solvents containing acids, water, gasoline, or any other
corrosive liquids.
2. Reinstall filler plug on Tool 6906A.
3. Verify pump power switch is turned OFF. Connect red alligator clip to positive (+) battery post. Connect black W alligator clip to a good ground.
4. Disconnect the cooler lines at the transmission.
NOTE: When flushing transmission cooler and lines, ALWAYS reverse flush.
