RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1998)
Crankshaft Rear Seal Pilot
5. Install the seal pilot (provided with the replacement kit) onto the crankshaft. Push the seal onto the crankshaft.
6. Remove the seal pilot.
Crankshaft Rear Seal Alignment/Installation Tool
7. Use alignment and installation tool packaged in the seal kit. Alternately, drive the seal at the 12, 3, 6 and 9 o'clock positions to prevent bending the
seal carrier during installation.