RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1998)
Courtesy Lamp Bulb: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Insert a long, narrow, flat-bladed tool in the notch on the curved edge of the reading and courtesy lamp lens.
3. Gently pry the lens downward from the overhead console housing and pivot the lens down. It may be necessary to move the tool along the edge of
the lens to free the lens from the console housing.
4. Remove the bulb by pulling it straight down from the bulb holders.
5. Install a new bulb by aligning its ends with the bulb holders, and pushing it firmly into place.
6. Pivot the lens back up into position and press upward firmly until it snaps back into place.
7. Connect the battery negative cable.
8. Test the lamp by depressing the lens to check for proper lamp switching and lighting.
