RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1998)
10. Disconnect end of transmission control (throttle valve) cable at fuel injection pump.
11. Disconnect end of speed control cable at fuel injection pump.
Injection Pump Lever
12. Loosen, but do not remove, bolts A, B and C on throttle arm lever.
Breakover Measurement
13. Move (pivot) throttle arm lever on injection pump lever to attain 260 mm (10 1/4") from point D at back of throttle arm lever, to point E at back
of throttle cable bracket. Take measurement through transmission throttle valve cable opening on throttle cable mounting bracket. Make sure
injection pump lever remains at closed throttle position during measurement.
14. Tighten bolts A, B and C to 10 Nm (89 in. lbs.) torque.