RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Speaker: Service and Repair
Rear Cab Side Panel Speaker
Rear Cab Side Panel Speaker Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim from the rear cab side panel. Refer to Body Interior for the procedures.
Fig. 20 Rear Speaker Remove/Install - Standard Cab
Fig. 21 Rear Speaker Remove/Install - Club Cab
3. Remove the two screws that secure the speaker to the cab side inner panel.
4. Pull the speaker away from the mounting hole in the cab side inner panel far enough to access the body wire harness connector.
5. Disconnect the body wire harness connector from the speaker connector receptacle.
6. Remove the speaker from the cab side inner panel.