RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig. 24
2. Remove the snap clips and retaining pins. (Fig. 24)
3. Remove the support cylinder.
INSTALLATION
1. Install the support cylinder with the thin end down.
2. Install the retaining pins and clips.
A-Pillar Trim
A-PILLAR TRIM
REMOVAL
1
Remove A-pillar grab handle, if equipped.
2
Grasp A-pillar trim at top and pull outward/downward to disengage upper spring clip.
3
Carefully pull bottom of A-pillar trim outward to disengage lower spring clip.
4
Disengage speaker harness connector, if equipped.
