RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig. 11
2. Remove the seat belt anchor bolt. (Fig. 11)
3. Using a trim stick C-4755 or equivalent, remove the lower c-pillar trim.
4. Pull seat belt out of the trim panel through the slot provided.
INSTALLATION
1. Route the shoulder belt through the slot in the trim.
2. Position the trim and seat the attachment clips fully.
3. Install the seat belt anchor bolt and tighten to 40 N.m (30 ft.lbs).
4. Install the upper c-pillar trim.
C-Pillar Upper Trim
C-PILLAR UPPER TRIM
REMOVAL
1. Remove the seat belt turning loop.
