RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig.5 Heating Element Installed - Typical
2. Connect the new heating element electrical connectors.
3. Connect the negative battery cable.
4. Verify heated seat system operation.
Fig. 6 Passenger Seat Wire Harness Routing
5. Install the appropriate seat cushion or seat back trim cover. Make certain the seat wire harness is correctly routed through the seat and seat back.
The excess wire between the cushion and back elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of
the trim cover.
