RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
2. Apply liberal quantity of Mopar multi-mileage grease to pedal shaft and to pedal and bracket bushings.
3. Position brake pedal in mounting bracket.
4. Slide pedal shaft into bracket and through pedal from passenger side.
5. Push pedal shaft out driver side of mounting bracket just enough to allow installation of retaining E-clip.
6. Install the wave washer between the bracket and the pedal bushing on the passenger side.
7. Push pedal shaft back toward passenger side of bracket and install remaining E-clip on pedal shaft.
8. Install booster push rod on brake pedal. Secure push rod to pedal with washer and retaining clip.
9. Install brake lamp switch bracket and switch.
10. Install knee bolster.
