RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Brake Rotor/Disc: Service and Repair
Installation
Front Brake Rotor
INSTALLATION - FRONT- 3500
1. Position the rotor on the hub/bearing.
2. Install the brake caliper adapter assembly and tighten adapter bolts to 285 Nm (210 ft. lbs).
3. Install the wheel and tire assemblies.
4. Remove the support and lower the vehicle.
5. Apply brakes several times to seat brake shoes and caliper piston. Do not move vehicle until firm brake pedal is obtained.
Rear Brake Rotor
INSTALLATION- REAR
1. Install the hub to the rotor. Tighten the bolts to 128 Nm (95 ft. lbs.).
2. Install the hub and rotor assembly.
3. Install the rear axle shaft to the housing with dual wheels.
4. Install the caliper adapter bolts.
5. Install the disc brake caliper.
6. Install the tire and wheel assembly.
7. Lower the vehicle.
