RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Valve: Testing and Inspection
CLEANING
Clean the valve stems with crocus cloth or a Scotch-Brite pad. Remove carbon with a soft wire brush. Clean valves, springs, retainers, and valve
retaining locks in a suitable solvent. Rinse in hot water and blow dry with compressed air.
INSPECTION
Visually inspect the valves for abnormal wear on the heads, stems, and tips.
Replace any valve that is worn out or bent (Fig. 40).
Measure the valve stem diameter in three places as shown in (Fig. 41).
Figure 42
