RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Accelerator Pedal: Description and Operation
Fig.4 APPS Assembly Location
Fig.5 APPS Sensor Location (Rear View)
ACCELERATOR PEDAL POSITION SENSOR
The APPS assembly is located at the top-left-front of the engine (Fig. 4). A plastic cover is used to cover the assembly. The actual sensor is
located behind its mounting bracket (Fig. 5).
The Accelerator Pedal Position Sensor (APPS) is a linear potentiometer. It provides the Engine Control Module (ECM) with a DC voltage signal
proportional to the angle, or position of the accelerator pedal. In previous model years, this part was known as the Throttle Position Sensor (TPS).
Diesel engines used in previous model years used a mechanical cable between the accelerator pedal and the TPS lever. Linkage and bellcranks
between the TPS cable lever and the fuel injection pump were also used. Although the cable has been retained with the APPS, the linkage and
