RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig.48 Wiring Clip At APPS
4. Disconnect wiring harness (clip) at bottom of Accelerator Pedal Position Sensor (APPS) mounting bracket (Fig. 48).
Fig.49 Air Tube (Typical)
5. Using 2 small screwdrivers, pry front wiring clip (Fig. 49) from cable bracket housing. Position wiring harness towards front of engine.
Fig.50 Rear View At APPS
6. Remove electrical connector from APPS by pushing connector tab rearward while pulling down on connector (Fig. 50).
