RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig.51 Air Intake Housing (Rear View)
7. Disconnect 2 electrical cables from cable mounting studs (Fig. 51) at intake air heater on top of intake manifold.
8. Remove engine oil dipstick from engine.
9. Remove engine oil dipstick tube support mounting bolt (Fig. 51) and position tube to side.
10. Disconnect clamps and remove air tube (intake manifold-to-intercooler) (Fig. 49).
Fig.52 Air Intake Housing (Front View)
11. Remove 4 air intake housing mounting bolts and remove housing (Fig. 52) and (Fig. 51). Position ground cable at top of air intake housing to front
of engine.