RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
Fig. 6
7. Remove dust seal from the housing with a seal pick.
CAUTION: Use care not to score the housing bore when prying out seals and washer.
8. Remove retaining ring with snap ring pliers.
9. Remove washer from the housing.
10. Remove oil seal from the housing with a seal pick.
Fig. 7
11. Remove pitman shaft bearing from housing with a bearing driver and handle.
INSTALLATION
1. Install pitman shaft bearing into housing with a bearing driver and handle.
2. Coat the oil seal and washer with special grease supplied with the new seal.
3. Install the oil seal with a driver and handle.