RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
ft. lbs.).
7. Clip the wiring harness on the steering column. Connect the multi- function switch wiring and tighten with 7 mm socket.
8. Install the upper fixed shroud.
9. Be sure both breakaway capsules are fully seated in the slots in the column support bracket. Pull the column rearward then tighten upper bracket
nuts to 12 Nm (105 inch lbs.).
10. Tighten the toe plate to floor pan attaching nuts to 22.5 Nm (200 inch lbs.).
11. Install the wiring connections to the column. Install the lower fixed shroud.
12. Column shift vehicles, install the PRNDL driver cable. Place shifter in Park position. If indicator needs adjusting, turn thumb screw on cable
retainer to adjust cable.
13. Install the lock housing shrouds. Install the tilt lever (if equipped).
14. Install the knee blocker and steering column opening cover.
15. Install steering wheel and tighten nut to 61 Nm (45 ft. lbs.).
16. Install the airbag.
17. Column shift vehicles, connect the shift link rod to the transmission shift lever. Use multi-purpose lubricant, or an equivalent product, to aid the
installation.
18. Install the battery ground (negative) cable.
19. Verify operation of the automatic transmission shift linkage and adjust as necessary.
