RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
5. Install new pinion seal with an appropriate installer (Fig. 51).
NOTE: Pinion depth shims are placed between the rear pinion bearing cone and pinion gear to achieve proper ring and pinion gear mesh. If ring and
pinion gears are reused, the pinion depth shim should not require replacement or adjustment. If the ring and pinion gears are replaced refer to
Adjustments to select the proper thickness shim.
6. Install rear bearing on the pinion gear with Installer D-389 and a press (Fig. 52).
7. Install original solid shims on pinion gears.
