RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
4. Using Installer 8154, install seal in extension housing (Fig. 99).
5. Install propeller shaft.
6. Verify proper transfer case fluid level.
7. Lower vehicle.
Front Output Shaft Seal
NV241HD - Transfer Case
FRONT OUTPUT SHAFT SEAL
REMOVAL
1. Shift transfer case into NEUTRAL.
2. Raise vehicle.
3. Remove front propeller shaft.
4. Remove companion flange nut (Fig. 100). Discard nut after removal. It is not reusable.
5. Remove companion flange from output shaft. Use a suitable puller if flange can not be removed by hand.
6. Remove companion flange rubber seal from front output shaft (Fig. 101).
7. Remove front output shaft seal with suitable pry tool, or a slide hammer mounted screw.