RAM 3500 Truck 4WD L6-5.9L DSL Turbo VIN C (2002)
CAUTION: Be sure the front output seal is seated below the top edge of the case bore as shown. The seal could loosen, or become cocked if not seated
to recommended depth.
2. Install companion flange seal on front shaft (Fig. 102).
3. Install companion flange on front shaft (Fig. 103). Then install and tighten flange nut to 176 - 271 Nm (130 - 200 ft. lbs.) torque.
4. Install propeller shaft.
