RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Winch Motor: Service and Repair
Motor-Tie Rods
Removal
REMOVAL
1. Remove the winch assembly. See: Service and Repair/Winch/Removal
2. Remove the bolts and remove the damaged tie rod(s).
Installation
INSTALLATION
1. Install the tie rod(s) and install the bolts.
2. Tighten the bolts to 23 Nm (17 ft. lbs.).
3. Install the winch assembly. See: Service and Repair/Winch/Installation
