RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Rear Door Exterior Handle: Service and Repair
Rear Door Exterior Handle - Installation
INSTALLATION
1. Position the exterior handle (2) into the door.
2. Install the two nuts (3) that secure the exterior handle to the door. Tighten the nuts to 10 Nm (89 in. lbs.).
3. Connect the actuator rod (1) to the exterior handle.
4. Install the front glass run channel See: Windows and Glass/Windows/Window Track/Service and Repair/Rear Door Glass Run Channel -
Installation .