RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
1. Using a grease pencil or equivalent, mark the position of the hinge on the door and b-pillar.
2. Remove the lower b-pillar trim. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim
3. Remove the nut (1) and bolt (9) attaching the hinge to the door.
4. Remove the two bolts (5) attaching the hinge to the b-pillar.
5. From the inside of the vehicle remove the remaining bolt (4) attaching the hinge to the b-pillar and remove the hinge.
