RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
5. On Quad Cab models, remove the child seat tether straps from the rear cab back panel (2) See: Restraint Systems/Seat Belt Systems/Child
Restraint/Child Seat Tether Attachment/Service and Repair/Removal .
6. On Quad Cab models, remove the center seat belt trim bezel See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and
Repair/Seat Belt and Retractor - Removal .
7. On Quad Cab models, remove the lower C-pillar trim panels See: Pillar Trim/C-Pillar Trim Panel-Removal .
8. On Quad Cab models, remove the two push-pin fasteners (1 and 4) that secure the rear cab trim panel (3) to the rear cab back panel and remove
the trim panel.
Installation
INSTALLATION
1. On Quad Cab models, position the rear cab trim panel (3) onto the rear cab back panel (2) and install the two push-pin fasteners (1 and 4).
2. On Quad Cab models, install the lower C-pillar trim panels See: Pillar Trim/C-Pillar Trim Panel-Installation .
3. On Quad Cab models, install the center seat belt trim bezel See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Seat
Belt and Retractor - Installation
4. On Quad Cab models, install the child seat tether straps See: Restraint Systems/Seat Belt Systems/Child Restraint/Child Seat Tether
Attachment/Service and Repair/Installation .
5. On Regular cab models, position the rear cab trim panel (1) onto the rear cab back panel (2) and install the utility hook (3) or the storage bin latch
(4) (depending on application).
6. On Regular cab models, install the lower B-pillar trim panels See: Pillar Trim/B-Pillar Trim .