RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
1. Remove the brake lines (1) from the junction block (2).
2. Remove the junction block (2) mounting bolt and remove the junction block from the bracket.
Installation
INSTALLATION
1. Position the junction block (2) on the bracket and install the mounting bolt. Tighten the mounting bolt to 23 Nm (210 in. lbs.).
2. Install the brake lines (1) into the junction block (2) and tighten to 19-23 Nm (170-200 in. lbs.).
3. Bleed the base brake system, See: Brake Bleeding .